Magic Pass 4300 User Manual Jun 2026

To add a user to the system, navigate to the enrollment menu. The device will prompt you to scan the same finger multiple times to create a complete and accurate record. As a backup, you can also enroll individuals using a numeric in case their fingerprint is ever unreadable due to a cut or dirt.

Check the LAN cable and ensure the Gateway IP matches your router.

| Event | LED | Buzzer | |-------|-----|--------| | Powered on | Solid green | None | | Card placed | Blinking green (3x) | 1 short beep | | Read successful | Flash green once | 1 short beep | | Write successful | Flash green twice | 2 short beeps | | Read/write error | Solid red 1 sec | 1 long beep | | USB enumeration | Green/red cycling | None | magic pass 4300 user manual

The Magic Pass 4300 supports L2TP and PPTP passthrough out of the box, but OpenVPN requires manual port forwarding:

Supports 125kHz or 13.56MHz cards (depending on model) for dual-factor authentication. To add a user to the system, navigate to the enrollment menu

The Magic Pass 4300 user manual is well-structured, detailed, and easy to follow. It provides clear instructions and explanations, making it accessible to both technical and non-technical users. The manual is divided into logical sections, allowing users to quickly find the information they need.

To manage the device via management software, configure its network parameters. Navigate to > Comm. > Ethernet . Disable DHCP if you require a permanent static IP address. Check the LAN cable and ensure the Gateway

High-level access to system configurations and logs.0;403;